STANDARD COMPONENTS • Germany PA8000 CNC control unit • IPG Ytterbium Laser Resonator • Automatic Double Pallet Changer(Shuttle Table) • Precision Rack & Pinion Drive System (Made in Germany) • Radan or Lantek CAD/CAM system • Light source • Chiller • 3 lower protective lenses • 3 Ceramic Nozzle Adapters • Auto-calibrated nozzle system • Smart Slag Collection System/ Chip Conveyor • Fiber Beam Transmission System (Fiber Cable) • Operates with both N2 and O2 (cutting) gases • Home Position Alignment System • Auxiliary Gas Selector • Auto Reflection Warning • Working Lights • 5 Nozzles each of the Following: (1.0mm, 1.2mm,1.5mm, 2.0mm , 2.5mm , 3.0mm) CUTTING HEAD • The laser beam is delivered to the cutting head by fiber optic cable. • The fiber optic cable is fixed to the input of cutting head. • The laser is delivered to the focusing unit after being aligned in the collimator. • The laser beam is set to desired focus using the lenses in the focusing unit. • The protection glass protects the lenses from the particles which are caused by the cutting operation. • The sensor insert is part of the elevation control system and helps to adjust the distance between material and cutting head. • Elevation control is checked with the most precise sensors in the market. This helps to produce better cuts. • The main function of the ceramic is to protect the cutting head. • The nozzle is used to control the assist gases. It is also a part of the capacitive control system.